|
 
| |
Dura-WareŽ
Options
|
-FG
14 Gage - Any 16 gage Dura-Ware fixture can be manufactured of a
heavier 14 gage stainless steel with the specification of this option.
|
|
-FP
Freeze Resistant Box - This option provides a surface mounted box
with cover positioned directly behind the fixture and wall to conceal
P-trap and single temp Air-Control valve assembly. Valve includes a
drain down valve which drains into P-trap receptacle when valve is not
in use. Fixture mounted on exterior wall remains free of any residual
water which may damage plumbing. Box must be installed where room
temperature remains above freezing.
|
|
-FV
Flush Valve - When specified, Acorn will provide a code approved
flush valve with a vacuum breaker and pushbutton. All exposed parts are
chrome-plated.
|
|
-FVC
Flush Valve Cover - By enclosing the flush valve of a top supply
toilet in a heavy gage stainless steel cover, this option prevents
tampering and renders the flush valve vandal-resistant.
|
|
-FVT
Flush Valve, Thru Wall Connection - For use where wall thickness
exceeds 2", this option allows the slip joint nut to be more
accessible, making installation easier. The outlets at each end are NPT
male threaded.
|
|
-GE
Grid Strainer and Close Elbow - Primarily designed for
handicapped applications, the specification of this option will provide
a chrome-plated, cast bronze strainer and close elbow which allow easy
wheelchair access. The elbow permits angular adjustment and features a
slip joint connection.
|
|
-GT
Grid Strainer and Tailpiece - Designed for use with Tubular
P-Trap (Suffix Option -TPT), this chrome-plated, cast bronze strainer
includes a 1-1/4" chrome-plated brass tailpiece.
|
|
-HS
Hinged Seat - When specified, Acorn will provide a white plastic,
hinged toilet seat. Although these seats offer obvious sanitary
advantages, they are not tamper-resistant.
|
|
-IS
Integral Shelf - With this option, the backsplash is extended to
form an integral shelf.
|
|
-LC
Lavatory for Carrier Mounting - With the specification of this
option, the fixture is modified to a 20" width and will accept a
standard concealed lavatory carrier. (Carrier provided by others.)
|
|
-M
Metering - Metering provides an adjustable timed cycle for flow
from Air-Control valve. Timing is field adjustable from 5 to 60 seconds.
Air-Control metering valves include a non-hold open feature when
specified with this option.
|
|
-MA
Manifold Air-Control Valves - Air-Control valve assemblies can be
manifolded to serve up to four fixtures from a single supply inlet. The
valve assembly can be remotely located up to 10 feet away from the
actuation pushbuttons.
|
|
-MH
Metering, Hot Side Only - When used with a hot and cold
Air-Control valve, this option provides for -M Metering for the hot
supply side only.
|
|
-MPG
Mirror, Plexiglas - This option provides a 1/4" thick
Plexiglas mirror in lieu of stainless steel and includes a 1/4"
thick fiberboard backing. Plexiglas is virtually unbreakable having
about 14 times the strength of glass, and has excellent reflective
qualities; however, the surface is subject to scratching.
|
|
-MTG
Mirror, Tempered Glass - This option provides a 1/4" thick
tempered glass mirror in lieu of stainless steel and includes a
1/4" thick fiberboard backing. Tempered glass has about four times
the strength of glass and if broken will crumble into small harmless
crystals. The surface is highly scratch resistant; however, the
reflective qualities are subject to imperfections due to the tempering
process.
|
|
-MVC1
Time-Trol Single Temperature- This single temperature valve is
for use with the Time-Trol Valve Controller. The 24V solenoid valve
features pushbutton activation and is provided with a stainless steel
strainer and integral checkstop. Valve conforms with the lead free
requirements of NSF61, Section 9, 1997 and ADA requirements. Refer to
individual MVC catalog sheets in Valves section for technical data.
|
|
-MVC2
Time-Trol Hot and Cold- This hot and cold valve is for use with
Time-Trol Valve Controllers. The 24V solenoid valve features pushbutton
activation and is provided with a stainless steel strainer and integral
checkstop. Valve conforms with the lead free requirements of NSF61,
Section 9, 1997 and ADA requirements. Refer to individual MVC catalog
sheets in Valves section for technical data.
|
|
-OF
Basin Overflow - This option provides lavatory bowl with an
overflow opening with connection to lavatory waste outlet.
|
|
-PH
Paper Holder - This option provides a recessed toilet paper
holder which accommodates standard sized rolls. The holder is fabricated
out of stainless steel and is welded into the body of the fixture. For
use with -FVC Flush Valve Cover.
|
|
-TE
Trap Enclosure - With this option, a stainless steel trap
enclosure is provided to lend a finished appearance to waste piping and
protect wheelchair users from burns. Enclosures are mounted to the wall
independently of the lavatory to facilitate piping maintenance.
|
|
Albert
Sterling & Associates, Inc.