Blowout Jet Toilet - Off Floor
Fixture is arranged to be installed on finished wall from the front side. It is fabricated from 16 gage, type 304 stainless steel and is seamless welded construction. Exterior has a satin finish, except for the integral contoured seat that has a sanitary high polish finish. Wall flange is reinforced for maximum strength.
Toilet is Blowout Jet type with elongated bowl. Toilet has a 1-1/2” NPT flush valve connection and requires a minimum of 25 PSI flow pressure. Trap has a minimum 3-1/2” seal, will pass a 2-1/8” ball and is fully enclosed. Toilet waste outlet is Gasketed Waste. Toilet will operate with a 1.6 GPF flush valve.
GUIDE SPECIFICATION
Provide and install Acorn Dura-Ware Blowout Jet Toilet (specify model number and options). Fixture shall be fabricated from 16 gage, type 304 stainless steel. Construction shall be seamless welded and exposed surfaces shall have a satin finish, except the integral contoured toilet seat, which shall have a sanitary high polish finish. Toilet shall be concealed blowout jet type with an elongated bowl and a self-draining flushing rim. Toilet trap shall pass a 2-1/8” diameter ball and be fully enclosed. Toilet to flush with a 1.6 GPF flush valve. Toilet waste outlet shall be Gasketed Waste.