-TPTTubular P-Trap - This option provides a 1-1/4" O.D. x
1-1/2" O.D. chrome plated brass tubular trap with wall flange. It
is usually specified along with the -GT Grid Strainer and Tailpiece.
-WA1Waste Adapter with 2 NCT Female Connection Provides an
O-ring slip type waste adapter with a 2 female NCT connecting end.
This option assists with installation of Blowout Jet Urinals from the
fixture side by providing a gastight and watertight seal. This adapter
is provided standard with every fixture.
-WA2Waste Adapter with 2 NPT Male Connection Provides an
O-ring slip type waste adapter with a 2 NPT male connection end. This
option assists with installation of Blowout Jet Urinals from the fixture
side by providing a gastight and watertight seal.
-WA3Waste Adapter with 2 NPT Female Connection Provides an
O-ring slip type waste adapter with a 2 NPT female connection end.
This option assists with installation of Blowout Jet Urinals from the
fixture side by providing a gastight and watertight seal.
-WA4Waste Adapter with 2 No-Hub Connection Provides an O-ring
slip type waste adapter with a 2 no-hub connection end. This option
assists with installation of Blowout Jet Urinals from the fixture side
by providing a gastight and watertight seal.
-WO33" Waste Outlet - This option provides a 3" O.D. toilet
bowl P-trap in lieu of standard 2-3/8" O.D. P-trap allows for
passage of a 2-5/8" diameter ball; however, it requires a 3.5 GPF
flush valve to operate. The waste outlet connection will remain the same
as standard (plain end or gasket flange).
-WPWall Plate for Fixture Support - This built-in plate provides
additional support for wall-mounted fixtures.
Albert
Sterling & Associates, Inc.
