18” Lav/Toilet - Suicide Resistant Comby
Fixture is arranged to be installed on finished wall and serviced from an accessible pipe chase. Optional Wall Sleeve or Metal Template is recommended for all installations to provide required wall openings. This unit is intended to reduce any possible risk of the fixture being used as a suicide device.
Cabinet is fabricated from 14 gage type 304 stainless steel and is seamless welded construction with exposed surfaces polished to a satin finish. Cabinet interior is sound-deadened with fire-resistant material.
Lavatory “D” Bowl is 15” x 13” x 5-1/2” deep. Standard elbow waste outlet is 1-1/2” O.D. plain end.
Lavatory Valve is an Air-Control pneumatically operated, pushbutton valve using atmospheric air. Pushbutton requires less than 5 pounds. to activate valve. Valve is metering, non-hold open type. Timing is from 5 to 60 seconds. Valve can be remotely located up to 10 feet from the operating pushbutton. Bubbler and valve pushbuttons are spherical type and do not include straight edges. Valve complies with the lead free requirements of NSF 61, Section 9-1997.
Toilet is blowout jet type with elongated bowl and requires a minimum of 25 PSI flow pressure. Trap has minimum 3-1/2” seal and will pass a 2-1/8” ball. Toilet waste outlet is 2-3/8” diameter plain end for wall outlet and Gasketed Waste for floor outlet. Toilet is manufactured to ANSI 112.19.2M requirements and flushes with a 1.6 GPF flush valve.
GUIDE SPECIFICATION
Provide and install Acorn Penal-Ware 18” wide Lav/Toilet Suicide Resistant Comby (Specify model number and options). Provide hemispherical cabinet design to reduce risk of fixture being used as a suicide device. Fixture shall be fabricated from 14 gage, type 304 stainless steel. Construction shall be seamless welded and exposed surfaces shall have a satin finish. Provide D shape lavatory bowl. Fixture shall have an Air-Control pneumatically operated, pushbutton valve. Valve shall require less than 5 pounds to activate. Valve to comply with NSF 61, Section 9-1997 lead free requirements. Provide –BPH Hemispherical Penal Bubbler and –PBH Hemispherical Penal Pushbutton. Provide toilet bowl housing to prohibit the attachment of objects. Toilet shall be concealed blowout jet type with an elongated bowl, self-draining flushing rim, and an integral contoured seat with a sanitary high polish finish. Toilet trap shall pass a 2-1/8” diameter ball and shall be fully enclosed. Toilet to conform with ANSI 112.19.2M. Cabinet interior shall be sound-deadened with fire-resistant material. Fixture shall withstand loading of 3,000 pounds without permanent damage. Fixture shall be furnished with necessary fasteners for proper installation.