Surgical Scrub Sink - Two Stations
Acorn 4102 Surgical Scrub Sink is designed for use in health care institutions providing surgeons with a convenient sink for pre-op scrub up.
Fixture is fabricated from heavy gage, type 304 stainless steel and is seamless welded construction polished to a satin finish. The cabinet interior is sound-deadened with a fire-resistant material. The unit is designed to be installed on the wall using a mounting carrier or it can be floor mounted on a stainless steel pedestal base.
Scrub Sinks are provided with front panels which are easily removed for access to the water control valves, waste connections, stops and strainers. Scrub sinks have a sloping bottom surface to minimize splashing and a 1-1/2” OD tailpiece with a 3” flat strainer drain.
Backsplash has a gooseneck assembly with a 1-1/2” sprayhead that can be removed for sterilization.
Thermostatic Mixing Valve Control is located on each control panel and maintains a constant water temperature. This easily adjustable, anti-scald valve will automatically shut off if the hot or cold water supply fails.
Water Supply Valves are mechanical pilot type, actuated by one push of a knee-operated front panel and turned off by a second push.
GUIDE SPECIFICATION
Provide an Acorn Two Station Surgical Scrub Sink (specify model number and options) 63-1/2” wide. Fixture shall be fabricated from heavy gage, type 304 stainless steel, with seamless welded construction polished to a satin finish. Cabinet interior shall have a sound-deadening, fire-resistant material. Cabinet shall also have removable panels to allow access to water control valves, waste connections, stops and strainers. Sinks shall have a sloping bottom to minimize splashing, and a 3” flat strainer drain. Goosenecks shall have a removable 1-1/2” sprayhead. Fixture shall have thermostatic mixing valves which are easily adjustable at the control panels. Manufacturer shall provide necessary installation instructions.