|
 
| |
Shower-Wareฎ
Options
|
-SC
Supply Cover - This cover is used with top supply showers to hide
supply piping and give a finished look to a shower installation. All
brackets and exposed fasteners are furnished, except fasteners for
attaching cover to the building. Shown here on Capital Column.
|
|
-T11
Shower Drain Base Top Supply with Dome Grate - Provides a cast
iron shower mounting base and drain for use with 600 and 700 series
column showers. Drain includes a 3 no-hub outlet connection and
clamping collar and is intended for vent off drain installation. Dome
grate is chrome plated cast bronze and secures to clamping collar.
Optionally available with IC 3 Inside Caulk Waste or FO 4
No-hub Outlet.
|
|
-T15
Shower Drain Base Top Supply with Dome Grate for Center Vent -
Provides a cast iron shower mounting base and drain for use with 600 and
700 series column showers. Drain includes a 3 no-hub outlet
connection, 2 IPS center vent pipe connection and clamping collar.
Dome grate is chrome plated cast bronze and secures to clamping collar.
|
|
-T21
Shower Drain Base Top Supply - Provides a cast iron shower
mounting base and drain for use with 600 and 700 series column showers.
Drain includes a 3 no-hub outlet connection and clamping collar and
is intended for vent off drain installation. Optionally available with
IC 3 Inside Caulk Waste or FO 4 No-hub Outlet.
|
|
-T25
Shower Drain Base Top Supply for Center Vent - Provides a cast
iron shower mounting base and drain for use with 600 and 700 series
column showers. Drain includes a 3 no-hub outlet connection, 2 IPS
center vent pipe connection and clamping collar.
|
|
-TC
Thermostatic Controller - This unit supplies water at a pre-set
constant temperature and will automatically compensate for temperature
variations. Due to its location above column, the controller is not
available with B15 or B25 drains. For B11 or B21 drains, an 11"
diameter supply cover (-SC) is required.
|
|
-VC
Valve Cover - This option provides a valve cover assembly for use
with 700 series column showers with Air-Control or Electronic valves.
The valve cover is intended for units that are ordered with bottom
supply to conceal the valve assembly positioned at the top of the unit.
The cover is manufactured of heavy gage type 304 stainless steel and
replaces the standard spray head lid.
|
|
-WH
Wide Housing - This suffix option is ideal for renovation
projects and is available on Apex Showers, except Corner-Mounted models.
When remodeling, this option allows tiles that are covered by the shower
to be relocated to repair other damaged areas.
|
|
-WS
Without Shower Head - When specifying a Zenith Shower, this
option is appropriate when shower heads are to be provided by others.
Acorn will only provide the control valve.
|
|
-Y
Universal Ball Joint - This suffix option permits movement of the
shower head in all directions, allowing the bather to adjust the spray
pattern as needed.
|
|
-YY
Lockable Universal Ball Joint - This modification of the standard
shower head has a set screw to lock the head into desired positions.
This serves to prevent water discharge into drying areas, aisles, and
doorways, which is especially beneficial in group shower applications.
|
|
-Z
Up-Down Ball Joint - Specification of this suffix option will not
allow the spray head to be manipulated from side to side, preventing
flooding outside of tubs. In group shower applications, it prevents the
spraying of adjacent bathers.
|
|
-ZZ
Lockable Up-Down Ball Joint - Like suffix option -YY, this
specification allows the shower head to be set and locked into position
along its vertical arc of movement.
|
|
Albert
Sterling & Associates, Inc.