|
 
| |
Shower-Ware®
Options
|
-A
Anchor Plate - When the wall surface is not adequate to support
flange loadings for square-flanged shower heads, Acorn recommends using
an Anchor Plate. It consists of a rust-resistant steel plate tapped to
receive the flange mounting screws. Additional screws are provided to
secure the Anchor Plate to the finished wall.
|
|
-B
Back Plate - Used with square-flanged shower heads, this suffix
option provides backing for the flange, which is tapped for mounting
through the wall. It can only be used where there is a pipe chase with
rear access to the shower head.
|
|
-B11
Shower Drain Base Bottom Supply with Dome Grate - Provides a cast
iron shower mounting base and drain for use with 600 and 700 series
column showers. Drain includes a 3” no-hub outlet connection, clamping
collar, supply inlet openings and is intended for vent off drain
installation. Dome grate is chrome plated cast bronze and secures to
clamping collar. Optionally available with –IC 3” Inside Caulk Waste
or –FO 4” No-hub Outlet.
|
|
-B15
Shower Drain Base Bottom Supply with Dome Grate for Center Vent -
Provides a cast iron shower mounting base and drain for use with 600 and
700 series column showers. Drain includes a 3” no-hub outlet
connection, 2” IPS center vent pipe connection, clamping collar and
supply inlet openings. Dome grate is chrome plated cast bronze and
secures to clamping collar.
|
|
-B21
Shower Drain Base Bottom Supply - Provides a cast iron shower
mounting base and drain for use with 600 and 700 series column showers.
Drain includes a 3” no-hub outlet connection, clamping collar, supply
inlet openings and is intended for vent off drain installation.
Optionally available with –IC 3” Inside Caulk Waste or –FO 4”
No-hub Outlet.
|
|
-B25
Shower Drain Base Bottom Supply for Center Vent - Provides a cast
iron shower mounting base and drain for use with 600 and 700 series
column showers. Drain includes a 3” no-hub outlet connection, 2” IPS
center vent pipe connection, clamping collar and supply inlet openings.
|
|
-BA
Bent Arm Head - Bent Arm Shower Heads work well over bathtubs and
are primarily specified for homes, apartments, hotels, and dormitories.
These heads are not recommended for use in applications where vandalism
is anticipated.
|
|
-BAT
Battery Operated (-MVC1) - Use of this option eliminates the
requirement to provide electrical power and wiring for units with -MVC1
Time-Trol. Each solenoid valve is powered by a concealed 9 volt battery.
|
|
-BS
Built-In Liquid Soap System - Specifying this option provides an
integral soap tank, factory pre-piped, and installed within the
Shower-Ware system. The liquid soap is piped to dispensers. Acme Modular
Showers are furnished with one six quart tank per six to eight stations,
and Meter-Trol dispensers at each station. Apex Showers, when specified
for two or three stations, have a two quart tank, and a single station
model is furnished with a one quart tank. Meter-Trol dispensers are
supplied for each soap station. Classic and Capital Showers are provided
with an approximate one gallon capacity tank. The exact size is affected
by shower supply configuration.
|
|
-CA
Ceiling Anchor Plate - This option is recommended for attaching a
supply cover (Suffix Option -SC) to a suspended ceiling.
|
|
-CD
Circular Soap Tray - Standard with Capital Column Showers, this
integral circular soap tray can also be specified with Classic Column
Showers. This self-draining soap tray surrounds the shower column and is
constructed of heavy gage, type 304 stainless steel. (Not available in
conjunction with Diana Privacy Compartments.)
|
|
-CF
Adjustable Column Flange - This option is a one-piece collar and
flange assembly built right into the column. It allows rotational
adjustment for misaligned drain bases. The adjustable flange is
constructed of 14 gage, type 304 stainless steel and is fully welded to
the column. The weld is ground smooth, and the entire column is polished
to a satin finish.
|
|
-CH
Curtain and Headrail - This option provides a 36" long
stainless steel curtain rail with a white vinyl curtain. Curtain rail
includes hooks and mounting clips to wall and is intended for
installation within an alcove.
|
|
-D
Soap Dish - This surface-mounted soap dish is constructed of
heavy gage, type 304 stainless steel. The body is designed with a drain
hole to keep bar soap dry.
|
|
-EG
Enviro-Glaze - Selection of this option provides a durable, chip
resistant color coat finish to the exterior of the fixture. Refer to
catalog ‘Color Selection’ tab for available colors and textures.
|
|
-EH
Extended Head - This option provides a longer bracket to which
the shower head is connected with a 17-1/2 degree discharge. Use of this
option reduces the amount of wet floor space and bather space by
projecting spray downward (closer to wall).
|
|
-F
Flow Control - Use of this option allows for water savings by
decreasing the flow rate to 2.0 GPM versus 2.5 GPM provided standard.
|
|
-FH
Fixed Head in Lieu of Handshower - This option provides an ADA
compliant fixed shower head with a 48" discharge height to
accommodate installations where vandalism of standard handshower is a
concern. Shown here with addition of -P Penal Shower head nozzle.
|
|
-FO
4" No-Hub Waste Outlet - This option is available with B11,
B21, T11 and T21 drains and is provided in lieu of 3" standard.
|
|
-FS
Foot Shower - On Column and Pylon Showers, this option is ideal
for outdoor installations such as beaches and swimming pools where users
want to rinse their legs and feet. The shower head is located 18"
above the ground and includes a separate control valve. This option is
provided in addition to the upper head.
|
|
Albert Sterling
& Associates, Inc.